All Categories > Vaults
Your Diode Vault can be used for more than just storage and chat relaying. Here are some of the advanced capabilities the Vault is sometimes used for: Residential Exit Node - you can configure your V…
Updated 10 months ago by Hans
Each Vault has a label on the bottom of it with a QR code and its model number and serial number. The Vault label looks like this: The model number is to the right of "M:" - in the label above, the m…
Congratulations on your purchase of a Vault ! Your Vault is a pre-configured hardware device that can interoperate with one or more Diode App Zones to give them more storage capacity, keep them avail…
Vault Model 2312-NT System Interfaces. Front Panel. Power Button. When the Vault is off, pushing the power button briefly will turn it on (button will immediately turn blue). When the Vault is on and…
See below for Vault Model Numbers and how to read them. Model Description How to Read 2312-NT The 2312-NT model is the first Vault model produced starting in December of 2023. It contains a solid sta…
Read the following for recommended process and expected behavior when powering the Vault up and down. Before unplugging your Vault, always safely shut it down by holding the power button down for 3-5…
Please see the topics below for common problems and potential solutions: Vault not joining Zone. For a Vault to accept an invite to a Zone, the invitation MUST be sent by the person whose Username wa…
Powered by HelpDocs (opens in a new tab)
Updated
by Hans
